Black Cafe barriers with high-quality fabric graphics
Steel components with powder-coated black finish.
350mm diameter base.
Includes 1360mm-wide graphic (printed either single-sided or double-sided).
Bespoke-printed graphic on Display Polyester.
Either full kits or extension kits available. Full kits include two posts and two bases, and can stand alone. Extension kits include one post and one base, and must be joined to another post.
Both single-sided and double-sided graphics include a pole pocket along the top, with eyelets in the bottom corners.
Supplied with a cross bar for the top of the graphic, and spring clips for the bottom corners of the graphic.
Double-sided graphics are finished with a blockout lining between sides to prevent light show-through.
Double-sided graphics are finished with no visible horizontal stitching for a more seamless look than many other Café Barriers. This allows a design to make more effective use of the entire printed area.
Each post collar allows the connection of four rails. This allows barriers to be joined at right angles (narrower angles are also possible).
Non-slip and non-marking plastic ring underneath the base to prevent damage to floors.
Each unit and graphic can be assembled and fitted in minutes, with no tools required.
Suitable for both outdoor and indoor use.
Whereas many suppliers use a lower-quality PVC banner material for Café Barriers, we use a high-quality Display Polyester 210gsm.